ViperKey Fob Programming

Pairing steps for every Viper remote we sell, from the 473V to the 7957VHD, taken from Directed’s own guides. Find your remote’s model number or FCC ID below.

Status
Current model
Documents
1 current

Manuals and guides

For owners

  • Directed digital remote pairing guide (DSx) Programming guide, PDF
Setup help

Find your Viper remote

Viper remotes don’t all pair the same way. Find your remote’s model number (it’s usually on the back), then follow the steps with that number in the title. Every step on this page comes from Directed’s own pairing guides.

  • 7756V: 2-way LCD remote.
  • 7656V, 7856V, 7857V: LED remotes, hold f then Start.
  • 7616V, 7816V: 1-button remotes.
  • 7116V, 7146V on a digital system: 6166T antenna.
  • 7617V, 7817V: 1-button, hold Remote Start.
  • 7657V, 7858V, 7858VHD, 7957V, 7957VHD: hold UNLOCK.
  • 7117V, 7122V, 7145V, 7146V, 7147V, 7147VS, 7345V, 7347V: hold Valet and press LOCK.
  • 7211V, 7701V: Stealth Code remotes.
  • 7153V, 7254V: Responder LE.
  • 7351V, 7752V: Responder LC and LC3 LCD remotes.
  • 7654V: Responder LC3/HD companion.
  • 7944V, 7945V: Responder HD, menu wheel.
  • 473V, 474T, 479V, 7141V, 7147VSEC, 7941V: ask us for the steps.

More answers for the Key Fob Programming

7756V: 2-way LCD remote

Same steps on analog systems (6816T or 6826T antenna: 3706V, 4706V, 5706V, 9756V, Mesa 5707VM) and digital ones (6867T antenna: DS4756V, D9756V).

  • Door open, key ON. Open a door and turn the key to ON. Don’t start the engine.
  • Tap, then hold the Valet button. Within 5 seconds, press and release the Valet button on the Control Center (the antenna on your windshield) once. Within 5 seconds, press and hold it. The LED starts flashing and the horn or siren sounds, if one is connected. Let go.
  • Hold f for about 8 seconds. Hold f until the remote beeps and shows MAIN MENU (8 to 12 seconds). Let go.
  • Scroll to PAIR. Press AUX or Start (the round arrow) until the screen shows PAIR.
  • Hold f for 3 beeps, then press LOCK. Hold f until the remote beeps 3 times and let go. Press LOCK and wait a few seconds: the horn or siren sounds, the remote plays tones and the screen says whether it paired. Failed? Press LOCK again.
  • Key OFF and test. Turn the key OFF, then test the remote.

Replacement remotes: Viper 7756V.

7656V, 7856V, 7857V: LED remotes

Same steps on analog systems (6816T or 6826T antenna) and digital ones (6867T antenna).

  • Door open, key ON. Open a door and turn the key to ON. Don’t start the engine.
  • Tap, then hold the Valet button. Within 5 seconds, press and release the Valet button on the Control Center (the antenna on your windshield) once. Within 5 seconds, press and hold it. The LED starts flashing and the horn or siren sounds, if one is connected. Let go.
  • Hold f for about 8 seconds. Hold f until the remote gives a long beep and its LED stays on. Let go.
  • Hold Start (the round arrow). Hold it until the transmit LED flashes 3 times, then stays on, and the remote beeps 3 times.
  • Press LOCK. The horn sounds (if connected). The 2-way 7856V and 7857V play tones; the 1-way 7656V doesn’t. Didn’t pair? Press f once, then repeat the last two steps.
  • Key OFF and test. Turn the key OFF, then test the remote.

Replacement remotes: Viper 7656V, Viper 7856V/7857V.

7616V, 7816V: 1-button remotes
  • Door open, key ON. Open a door and turn the key to ON. Don’t start the engine.
  • Tap, then hold the Valet button. Within 10 seconds, press and release the Valet button on the Control Center once, then press and hold it. The LED flashes once at a time and the horn sounds (if connected). Let go.
  • Put the remote in pairing mode. Press the remote’s button twice quickly, then press and hold it. The transmit LED comes on solid: keep holding until its pattern changes, then let go. The LED flashing means the remote is in pairing mode.
  • Press the button once. The horn sounds (if connected). The 2-way 7816V plays tones; the 1-way 7616V doesn’t. Didn’t pair? Start again from the top.
  • Key OFF and test. Turn the key OFF, then test the remote.

Replacement remotes: Viper 7616V, Viper 7816V.

7116V, 7146V on a digital system

For the DS4116V, D9116V, DS4146V and D9146V (6166T antenna).

  • Door open, key ON. Open a door and turn the key to ON. Don’t start the engine.
  • Tap, then hold the Valet button. Within 10 seconds, press and release the Valet button once, then press and hold it. The LED starts flashing and the horn or siren sounds (if connected). Let go.
  • Press LOCK. On the 1-button 7116V, press its button. The horn sounds (if connected) when it pairs.
  • Key OFF and test. Turn the key OFF, then test the remote.

7146V on an analog system: use “Hold Valet and press LOCK” below. 7116V on a Viper 4115V or Mesa 4117VM: ask us before you start.

Replacement remotes: Viper 7116V, Viper 7146V.

7617V, 7817V: hold Remote Start
  • Door open, key ON. Open a door and turn the key to ON. Don’t start the engine.
  • Tap, then hold the Valet button. Within 5 seconds, press and release the Valet button on the Control Center (the antenna on your windshield) once. Within 5 seconds, press and hold it. The LED starts flashing and the horn or siren sounds, if one is connected. Let go.
  • Hold REMOTE START for 8 seconds. The transmit LED comes on and the remote gives one long beep: it’s in pairing mode. Let go straight away.
  • Within 2 seconds, press REMOTE START again. Too slow and the remote leaves pairing mode: start again.
  • Wait a few seconds. The horn or siren sounds (if connected) when it pairs.

Replacement remotes: Viper 7617V, Viper 7817V.

7657V, 7858V, 7858VHD, 7957V, 7957VHD: hold UNLOCK
  • Door open, key ON. Open a door and turn the key to ON. Don’t start the engine.
  • Tap, then hold the Valet button. Within 5 seconds, press and release the Valet button on the Control Center (the antenna on your windshield) once. Within 5 seconds, press and hold it. The LED starts flashing and the horn or siren sounds, if one is connected. Let go.
  • Hold UNLOCK for 8 seconds. The remote gives one long beep and enters pairing mode (the 7957V and 7957VHD screens say so). Let go straight away.
  • Within 2 seconds, press UNLOCK again. Too slow and the remote leaves pairing mode: start again.
  • Wait a few seconds. The horn or siren sounds (if connected) when it pairs. The color-screen remotes play tones and show a confirmation.

To leave pairing mode on the remote, wait 30 seconds, or press f once, then hold it until the transmit LED goes off.

Replacement remotes: Viper 7657V, Viper 7858V, Viper 7858VHD, Viper 7957V, Viper 7957VHD.

7117V, 7122V, 7145V, 7146V, 7147V, 7147VS, 7345V, 7347V: hold Valet and press LOCK

How many times you tap the Valet button depends on your system, not your remote:

  • 1 tap: 412V, 2103V, 4105V, 4109V, 4119V, 5105V, 5108V, 5305V, 5308V, D9117V, D9146V, D9147V.
  • 7 taps: 350Plus, R350, 3100V, 3103V, 3103VX, 3105V, 3108V, 3305V, 3308V, 3400V, 3401V.
  • Door open, key ON. Open a door and turn the key to ON. Don’t start the engine.
  • Tap, then hold the Valet button. Within 5 seconds, press and release the Valet button the number of times for your system, then press it once more and hold it. The LED flashes the same number of times and the siren or horn sounds (if connected). Don’t let go.
  • Still holding, press LOCK. The horn (if connected) confirms the remote is paired. On the 7147V, 7147VS and 7347V you can press LOCK on each remote in turn. 7117V: press its Remote Start button. 7122V: press its LOCK/UNLOCK button.
  • Let go and turn the key OFF. The 7147V, 7147VS and 7347V give one long honk when pairing ends.

System not listed? Ask us before you start. 7146V on a DS4146V or D9146V: use the digital steps above.

Replacement remotes: Viper 7117V, Viper 7122V, Viper 7145V, Viper 7146V, Viper 7147V, Viper 7147VS, Viper 7345V, Viper 7347V.

7211V, 7701V: Stealth Code remotes

The system’s Valet/Program switch has to be plugged into the BLUE port.

  • Door open, key ON. Open a door and turn the key to ON. Don’t start the engine.
  • Tap once, then hold. Within 5 seconds, press and release the Valet/Program button once (auto-learn), then press it once more and hold it. The LED flashes once and the siren chirps (if connected). Don’t let go.
  • Still holding, press a button on the remote. The unit chirps (if a horn or siren is connected) when it has learned the remote.
  • Let go and remove the key.

Careful: 2 taps on the 7211V’s system, or 11 taps on the 7701V’s, deletes every remote.

Replacement remotes: Viper 7211V, Viper 7701V.

7153V, 7254V: Responder LE
  • Get the system ready. Open a door and turn the ignition ON. Press and release the programming button on the Control Center, then press and hold it. The Control Center LED flashes and the siren or horn sounds once. Let go.
  • Hold f. Hold f until the transmit LED comes on, then let go.
  • Press Start (the round arrow). 7153V: press it once. 7254V: hold it. Either way the transmit LED flashes 3 times.
  • Hold LOCK. Hold LOCK until the siren or horn sounds: the remote is learned. The 7254V also plays chimes; no chimes means the system isn’t ready any more, so get it ready and try LOCK again.
  • Back to normal. Press and release f, then hold it until the transmit LED goes off.

Replacement remotes: Viper 7153V, Viper 7254V.

7351V, 7752V: Responder LC and LC3 LCD
  • Get the system ready. Open a door and turn the ignition ON. Press and release the programming button on the Control Center, then press and hold it. The Control Center LED flashes and the siren or horn sounds once. Let go.
  • Hold f. Hold f until the screen shows MAIN MENU, then let go: it shows REMOTE SETUP.
  • Press Start (the round arrow) twice. The screen shows PAIR REMOTE.
  • Hold f. Hold f until the screen shows PAIR, then let go.
  • Hold LOCK. Hold LOCK until the siren or horn sounds and the screen shows SUCCESS. FAILED? Make sure the system is still ready and hold LOCK again.
  • Exit. Press Start (the round arrow) twice until the screen shows EXIT, then press f.

Replacement remotes: Viper 7351V, Viper 7752V.

7654V: Responder LC3/HD companion

This one starts on the remote.

  • Set Car 1 or Car 2 on the remote, if you use both.
  • Hold f for 8 seconds. The transmit LED comes on. Let go.
  • Within 30 seconds, hold Start (the round arrow) for 2 seconds. The transmit LED flashes, then stays on. The remote is ready.
  • Door open, key ON. Open a door and turn the key to ON. Don’t start the engine.
  • Tap, then hold the Valet button. Within 5 seconds, press and release the Valet button on the Control Center (the antenna on your windshield) once. Within 5 seconds, press and hold it. The LED starts flashing and the horn or siren sounds, if one is connected. Let go.
  • Press LOCK. The horn or siren sounds when it pairs. Didn’t? Press LOCK again.
  • Key OFF. The horn or siren sounds to confirm. To put the remote back to normal, press and release f, then hold it until the transmit LED goes off.

Replacement remotes: Viper 7654V.

7944V, 7945V: Responder HD
  • Get the system ready. Open a door and turn the ignition ON. Press, release, then press and hold the button on the Control Center. The LED flashes and the siren or horn sounds once. Let go.
  • Open SETTINGS. With the remote’s screen blank, press in and hold the menu wheel on its side for 3 seconds.
  • Go to ADJUSTMENTS. Turn the wheel to ADJUSTMENTS and press it in.
  • Choose REMOTE PAIR. Highlight REMOTE PAIR and press the wheel in, then follow the screen: hold LOCK until the remote plays tones, the siren chirps, then let go of LOCK.
  • Check the result. The screen says whether it paired. If it failed, it goes back to REMOTE PAIR: press LOCK again.
  • Key OFF. The siren or horn sounds to confirm. The remote leaves pairing mode on its own after 30 seconds.

Replacement remotes: Viper 7945V.

473V, 474T, 479V, 7141V, 7147VSEC, 7941V

Directed doesn’t publish pairing steps for these remotes. Submit a ticket with your remote’s model number and the model or antenna part number of your system, and we’ll send you the right steps.

Replacement remotes: Viper 473V, Viper 479V, Viper 7147VSEC.

If the remote won’t pair
  • Pairing mode ended: the system leaves pairing mode when the ignition goes OFF, the open door is closed, nothing is pressed for a while (60 seconds on most systems) or the Valet button is pressed too many times. The remote leaves it after 30 seconds. Start again from the top.
  • Car 1 or Car 2: if your remote runs two vehicles, set it to the right car before you pair it.
  • Older Directed system with a new antenna: disarm it and make sure the Control Center LED has been completely off for at least 60 seconds before you start.
  • New Control Center: any time the Control Center is replaced, every remote has to be paired again.
  • Still failing on a digital system: the firmware flashed to the system has to suit your antenna and remote. That’s an installer job: submit a ticket and we’ll help.