Power Liftgate & Power Trunk Kits

Add a power liftgate to an SUV, hatchback or minivan that came without one, or a power trunk to many sedans. Each kit is made for one vehicle, opens and closes at the press of a button, and still works by hand. Buy the kit, or have us install it in Markham in about four hours.

Fit checkDoes it fit my vehicle?Pick your year, make and model, or enter your VIN.

Customers rate us 4.7/5 based on 1226 reviews.

How to order a power liftgate kit

  1. Check your vehicleEach kit is made for one vehicle. Pick yours or enter your VIN.
  2. Pay at checkoutFor the kit, plus the installation if you add it. The kit reaches us in 5–7 days.
  3. We install itWe call to book when it arrives: about four hours at our Markham shop.

Does it fit my vehicle?

Each kit is made for one vehicle. Pick yours and we'll show the kit that fits it, with the kit price and the installed price.

or pick your vehicle

Year ranges are a guide: the same model can differ by country or change mid-year. We confirm the kit fits before we order it.

Vehicles we have kits for

Every vehicle on our list, with the kit made for it and its model years. Pick your make or search for your model, then check your year.

How ordering works

Each kit is made for one vehicle, so we order yours in when you buy it.

  1. Pay at checkoutYou pay for the kit, and for the installation if you add it, with $50 off the installation. This places the order with our supplier for the kit made for your vehicle.
  2. It reaches us in 5–7 daysDelivery to our Markham shop takes 5–7 days.
  3. We call you to bookWhen your kit arrives, we contact you to schedule the installation.
  4. We install itAbout four hours at our Markham shop, by appointment.

Buying the kit only? It's ordered the same way and ships to you once it reaches us.

The two kits we install

Each vehicle has one kit made for it, and the checker above shows which. Both come with everything your vehicle needs, and our technicians can install either one.

Most installed
Autoease TL105G3 Power Liftgate Kit remote opening the rear liftgate of a red SUV with professional installation.

Autoease TL105G3

Power liftgate kit for SUVs, hatchbacks and minivans, plus the trunk on a few sedans

Our most installed kit, made for 161 models from 27 makes, from the Toyota RAV4 and Honda CR-V to the Hyundai Tucson and Kia Telluride.

  • On SUVs, hatchbacks and minivans, two powered struts replace your gas struts
  • Open and close with the dash button, the gate button or, on most vehicles, your factory remote
  • Stops and goes back up if it meets something while closing
  • Set how high it opens, plus a normal or fast speed
  • Optional foot kick sensor
  • Still opens and closes by hand
  • Rated for −30 °C to 65 °C
  • 1-year warranty on the kit
Kit only$641.22Ordered in for you, free shipping on orders over $200
Installed$876.21Kit $641.22 + install $234.99 ($50 off), paid at checkout
Sedans and more
JINGLE JGS Power Liftgate Kit with remote control for hands-free trunk operation, professional installation by Connected Car Experts

JINGLE JGS

Power liftgate and power trunk kit

The kit we use where Autoease doesn't have one, including power trunks on sedans like the Toyota Camry and Corolla, BMW 3 and 5 Series, Mercedes-Benz C- and E-Class and Audi A4.

  • Power liftgate or power trunk, matched to your vehicle
  • Foot sensor included
  • Works with your factory remote on most vehicles
  • Sealed IP67 struts rated for 100,000 cycles
  • Dash and gate buttons
  • 1-year warranty on the kit
Kit only$605.60Ordered in for you, free shipping on orders over $200
Installed$840.59Kit $605.60 + install $234.99 ($50 off), paid at checkout

All power liftgate kits and add-ons

Autoease

Autoease TL105G3 Power Liftgate Kit

$641.22

Kit only

JINGLE

JINGLE JGS Power Liftgate & Power Trunk Kit

$605.60

Kit only

How a power liftgate kit works

It replaces the parts that hold your liftgate up and adds the motors and controls a factory power liftgate has.

Powered struts replace the liftgate's gas struts

On an SUV, hatchback or minivan, your two gas struts come off and two motorized struts go on, matched to the weight of your gate. A control box reads your vehicle's signals and runs them.

Open it your way

Use the button on the dash, the button on the gate, your factory remote on most vehicles, or a kick under the bumper with a foot sensor. It still opens by hand.

Stops if something's in the way

If the gate meets something while closing, it stops and goes back up, and it beeps while it moves. You set how high it opens, which helps in a low garage.

Our advice

Have us install it

A power liftgate is part mechanical and part electrical. Both struts have to be mounted so the gate moves evenly and closes cleanly, and the wiring has to run from the gate into the body without being pinched every time it opens. We do the whole job, set the opening height with you and show you every way to open it before you leave. Bought your kit somewhere else? Ask us first; we decide case by case.

Order your kit with installation and we'll call to book as soon as it reaches us, usually 5–7 days after you order. You pay for both at checkout, with $50 off the installation.

About four hours · Lifetime installation warranty · Installing in Markham since 2003

From our customers

What liftgate customers tell us

“Installed the power liftgate for my basic CX-5 by Lockdown Security over the last weekend. Price is reasonable and the services is excellent. Love the kick sensor which make my life so much easier after grocery shopping.” Elsa, Mazda CX-5

“Install process was very smooth. Work was completed faster than planned and clear explanation on how to use. I have had no issues since.” Brian H.

More for your vehicle

Other upgrades customers add while their vehicle is in the bay.

Power liftgate questions

Will a power liftgate kit fit my vehicle?

Only if there's a kit made for it. Power liftgate kits aren't universal: each one comes with struts, brackets, wiring and a control box made for one vehicle. Use the checker at the top of this page, or enter your VIN. If your vehicle isn't listed, send us photos of both ends of your liftgate struts and we'll check with the maker.

How does ordering work, and how long does it take?

Each kit is made for one vehicle, so we order yours in when you buy it.

  1. Pay at checkout. You pay for the kit, and for the installation if you add it, with $50 off the installation. Your payment places the order with our supplier.
  2. It reaches us in 5–7 days.
  3. We call you to book. When your kit arrives, we contact you to schedule the installation, about four hours at our Markham shop.

Buying the kit only? It's ordered the same way and ships to you once it reaches us.

How do I open and close it?

With the button on the dash or the button on the gate. On most vehicles both kits also work with your factory remote. With the Autoease kit there's nothing to program: hold the trunk button for about three seconds, or press unlock three times if your remote has no trunk button. Add a foot kick sensor and a kick under the bumper does it too. You can still open and close the gate by hand.

Will it close on someone?

No. If the gate meets something while it's closing, it stops and goes back up. It also beeps while it moves, so anyone nearby knows it's coming.

Does it work in a Canadian winter?

Yes. Autoease tests its kit from −30 °C to 65 °C and the system is waterproof; JINGLE's struts are sealed to IP67. After freezing rain, clear any ice along the gate's seal before you open it, as you would by hand.

Can I set how high it opens?

Yes. You set the opening height, which helps in a garage with a low ceiling or if you're shorter. The Autoease kit also has a normal and a fast opening speed.

Can you add a power trunk to a sedan?

On many sedans, yes. JINGLE makes power trunk kits for vehicles like the Toyota Camry, Corolla and Avalon, the BMW 3 and 5 Series, the Mercedes-Benz A-, C- and E-Class sedans, and the Audi A3 and A4 sedans. Check your vehicle. If you only want the trunk to pop open from your remote, a trunk release solenoid is simpler and cheaper.

How long does the installation take?

About four hours for most vehicles, by appointment, so you'll have it back the same day. We book it once your kit reaches us, usually 5–7 days after you order. We fit the kit, run and connect the wiring, set the opening height and test it with you before you leave.

Do you have to cut wires or drill holes?

The kits connect with harness adapters made for the vehicle, so on most installs we don't cut into factory wiring. Some vehicles have no factory hole for the dash button or the strut cables, and those need a small hole drilled. We'll tell you before we start.

What's the foot kick sensor?

An add-on for the Autoease kit. It mounts under the rear bumper, so a kick under the bumper opens or closes the gate when your hands are full. It isn't included with the Autoease kit; add the Autoease foot kick sensor to your order. The JINGLE kit comes with a foot sensor.

Can I install it myself?

Yes, if you're comfortable removing interior trim and doing basic 12V work. Autoease puts a first install at about two to three hours, and our Autoease install guides cover many vehicles. Would rather we did it? The installed price is on every kit.

What warranty do I get?

Both kits have a one-year warranty from the maker. Our installation work has a lifetime warranty: if anything we did ever needs attention, bring the vehicle back and we'll make it right.

Will it affect my vehicle's warranty?

A power liftgate kit connects to your vehicle's wiring, so connections are made. We make them to factory standards and can document what was added and where. A manufacturer generally can't void your whole warranty over an aftermarket accessory; the usual position is that they'd need to show it caused the specific problem. If your vehicle is under warranty and you're concerned, ask us before you book.

Not sure your vehicle is covered?

Send us your year, make and model. We'll confirm the kit and give you the installed price.