Dash cam power cables · Ships across Canada · Installed at our Markham shop
In the box: VIOFO OP100 OBD-II power adapter, USB-C parking mode cable, 3.5 m, 2 hook-and-loop fasteners
Total
This one's out of stock right now. Text us and we'll tell you when it's back
Not sure it fits? Text us your camera modelPick your camera. We'll tell you if the Viofo OP100 fits it, or show you the cable that does.
1. Pick your camera brand
2. Pick your model
2. Pick your model
2. Pick your model
2. Pick your model
2. Pick your model
Pick your camera to check.
Text us your camera model and we'll find the right part.
The cameras we sell that it fits.
Viofo A229 Pro 2CH
$449.99 CAD
Viofo A329S 2CH
$549.99 CAD
Viofo A229 Pro 3CH
$489.99 CAD
Viofo A229 Pro 1CH
$359.99 CAD
Viofo A329S 1CH
$459.99 CAD
Viofo A329S 3CH
$649.99 CAD
Viofo A119M Pro
$229.99 CAD
Also fits: Viofo A229 Plus, Viofo A229 Ultra, Viofo A119 MINI 2, Viofo A329, Viofo A139, Viofo T130, Viofo VS1
Hardwiring is part of every dash cam install we do. We hide the cable behind the trim, connect it to the right fuses and set up parking mode, and the work is covered by our lifetime installation warranty.
Bought your camera somewhere else? Contact us before you book and we'll confirm the price.
The Viofo OP100 powers your Viofo dash cam from the OBD-II port under the dash, with parking mode. No fuse taps and no wiring: plug it in, route the cable to the camera, and the camera keeps recording when you park.
Viofo dash cams with a USB-C power port. See Cameras it works with, or use the fit check on this page.
There are three ways to power a dash cam. Only two of them give you parking mode.
Wires to your fuse box with fuse taps. The neatest install: the cable disappears behind the trim, the 12V socket stays free, and parking mode runs with a low-voltage cut-off. Most kits need two fuse taps, sold separately.
Plugs into the diagnostic port under the dash. Parking mode without touching the fuse box, and easy to take out at lease return. It has to come out when a mechanic needs the port, and some vehicles turn the port off when parked.
Plugs into the cigarette lighter socket. Nothing to wire, and handy as a spare for a second vehicle. In most vehicles the socket turns off with the engine, so there's no parking mode.
Verified reviews from customers who bought this.
Only if you want parking mode. For recording while you drive, the 12V cable that came with your camera does the job. Parking mode needs power with the engine off, which means a hardwire kit to the fuse box, an OBD-II cable, or a dash cam battery pack.
Not to the point of stranding you, when it's set up right. Every hardwire kit and OBD-II cable we sell shuts the camera off at a set voltage, either with a switch on the kit or in the camera's settings. An old battery and cold weather cut the margin, so set the cut-off higher in winter. If your vehicle sits for days at a time, a dash cam battery pack keeps your starting battery out of it completely.
For a hardwire kit, yes, usually two: one on a constant fuse and one on an ignition fuse. Most kits don't include them. If this one does, it says so under What's in the box. Fuse taps come in five sizes, so check yours first with our fuse identifier.
Both give you parking mode. A hardwire kit is the tidier, permanent install and leaves the OBD-II port free. An OBD-II cable is quicker to fit and easier to remove, which suits leased vehicles. Some vehicles turn the OBD-II port off when parked; on those, a hardwire kit is the way to go.
Use the cable made for your camera. The plugs can look the same, but cables differ in output, in how they tell the camera the engine is off, and in their cut-off. The wrong one can leave parking mode not working. Use the fit check above, or text us your camera model.
The length is under At a glance. In most cars and SUVs, 3 to 4 metres reaches from the windshield to a fuse box under the dash. If your fuse box is in the trunk or under the hood, or you drive a truck or van, pick a longer cable or text us and we'll tell you what fits.
If you're comfortable finding a constant and an ignition fuse with a test light, yes. Budget about an hour, and follow the steps in the user guide. Or have us do it at our Markham shop: hardwiring is part of every dash cam install, with our lifetime installation warranty.
Yes. Shipping is free in Canada on orders over $200, and smaller orders ship for a flat $10. We also ship to the US and worldwide; US orders may be charged duties at checkout.
Text us your camera model and tell us what you want parking mode to do. We'll point you to the right cable.
