The Viofo HK6-F is the hardwire kit made specifically for the T330 and T340 series. Neither camera can record in parking mode without it — the car charger in the box only powers the camera while you drive.

Not the same part as the HK6

The HK6 (without the F) is the kit for the A329S series. It looks similar, but it will not unlock the T330 or T340 parking features. If you own a T330 or T340, this is the one you need.

What it does

• Parking mode power — wires the camera to the fuse box for constant 12–24V power, so it keeps recording with the engine off.
• Hybrid Parking Recording — the camera records in time-lapse, low-bitrate or event mode, then drops to low-power impact detection once your cut-off time or voltage is reached.
• Voltage cut-off — a physical switch on the kit cuts power entirely below the level you set, so your car always starts.
• Bluetooth battery readout — the kit broadcasts your car battery voltage to the camera. You can check it in the Viofo app and stamp it on your footage. No pairing needed.

Installation

The HK6-F taps into your fuse box using fuse taps, and the cut-off voltage is set to suit your battery. If you'd rather not work in the fuse box, we install it with your camera at our Markham shop and set the cut-off for your vehicle.

Compatibility

• Viofo T330 series (2CH, 3CH, T, W, WW, TW)
• Viofo T340 series (3CH, W, 4CH, WW, TW)

Not compatible with the A329S, A229 or A149 series. The A149 Pro uses the HK6-A.