BLADE-AL flashed for your vehicle
Tell us your year, make and model at checkout and we flash the BLADE-AL with the right firmware before it ships.
Ships across Canada from Markham · Installed at our shop or on-site in the GTA


Compustar CM-X, BLADE-AL and the Firstech T-harness for your vehicle
The Compustar CM-X controller, the iDatalink BLADE-AL bypass and the Firstech T-harness for your vehicle. A remote kit and installation are extra.
Total
This one's out of stock right now. Text us and we'll tell you when it's back
Text us your year, make and modelA T-harness plugs into your vehicle’s own connectors, so a kit means far less wiring than a hardwired install. Check your vehicle in the list below: it’s Firstech’s own list for this harness, with our pick for each vehicle we have a page for.
⭕ This solution requires KLON programming
KLON is a two-stage programming process, and it exists for a good reason: it means you don't have to sacrifice one of your keys. On a modern vehicle a spare key can cost several hundred dollars, so this saves real money.
Completing it requires a iDatalink ADS-USB programming tool, which is not included. There is no alternative method. The ADS-USB-ECO is a lower-cost option that does the same job.
Buying from us? This usually isn't a problem. We pre-program modules before they ship on most vehicles, so it arrives ready to install. Just tell us your year, make and model at checkout.
Every vehicle Firstech lists for the FTI-HDP8 T-harness in this kit. Push-button start.
Fits. Our first choice for this vehicle: Fortin EVO-ONE-HON7 Plug and Play Remote Starter for Acura and Honda
Fits. Our first choice for this vehicle: Fortin EVO-ONE-HON7 Plug and Play Remote Starter for Acura and Honda
Fits. Our first choice for this vehicle: Fortin EVO-ONE-HON7 Plug and Play Remote Starter for Acura and Honda
Fits. Our first choice for this vehicle: Fortin EVO-ONE-HON7 Plug and Play Remote Starter for Acura and Honda
Fits. Our first choice for this vehicle: Fortin EVO-ONE-HON7 Plug and Play Remote Starter for Acura and Honda
Source: Firstech’s installer wiring lookup for the FTI-HDP8, read October 23, 2026. Firstech lists the vehicles a harness is wired for; options and trims can still change what’s needed, so text us if you’re not sure.
Everything for a plug-in remote starter is in the box: the Compustar CM-X controller, the iDatalink BLADE-AL bypass and the FTI-HDP8 T-harness for push-button start vehicles.
FT-CMX-HCThe Compustar CM-X controller: the remote starter itself.See it on its own
BLADE-ALThe iDatalink BLADE-AL bypass, flashed with DL-HA6 firmware for your vehicle.
FTI-HDP8The Firstech T-harness: plugs into your vehicle’s own connectors (push-button start).See it on its own
Already have a Compustar CM-X, CM9S, CM9L, CM7 or CM900 and a BLADE-AL? Get the FTI-HDP8 on its own · $132.00 CAD
A plug-in Compustar remote starter kit for push-button start Honda and Acura vehicles, 2016 to 2024. Everything for the remote starter is in the box, and the Firstech FTI-HDP8 T-harness plugs into your vehicle’s own connectors, so there’s far less wiring than a hardwired install. Firstech lists it for 5 models.
Push-button start versions only. This is Firstech’s own list for the FTI-HDP8, from their installer lookup. Trims and options can change what’s needed, so check your exact vehicle in the list near the top of this page, or text us your year, make and model.
On many vehicles, three presses of lock on your factory remote start it, so a remote is optional. For more range, or a 2-way remote that confirms the start, add a Compustar remote kit that lists the CM-X. To start it from your phone, add the DRONE X2-LTE.
We install it at our Markham shop or on-site in the GTA, with our lifetime installation warranty. Book an install. Doing it yourself? The T-harness plugs into the vehicle’s own connectors, but expect to make a few connections too. Text us your year, make and model with any questions.
Buy it from us and we can install it for you, or you can do it yourself.
Tell us your year, make and model at checkout and we flash the BLADE-AL with the right firmware before it ships.
Drop it off or wait at our Markham shop, or we come to you in the GTA. Most installs can be done on-site; a few need the shop.
Every install we do comes with our lifetime installation warranty.
Plenty of our customers do. A T-harness plugs into the vehicle’s own connectors, but expect to make a few connections too. Check your vehicle in the list above before you start, and text us your year, make and model with any questions.
Verified reviews from our customers.
Check your vehicle in the list near the top of this page. It’s Firstech’s own list for this harness, from their installer lookup, and every vehicle we have a page for links to it with our pick. Not listed? Search by vehicle, or text us your year, make and model.
The Compustar CM-X controller (FT-CMX-HC), the iDatalink BLADE-AL bypass and the Firstech T-harness for your vehicle. What’s in the kit shows each part and the BLADE-AL firmware it gets.
On many vehicles, yes: press lock three times. Not every vehicle supports it. For more range, or a remote that confirms the start, add a Compustar remote kit that lists the CM-X.
Yes, it’s flashed with firmware for your vehicle. Tell us your year, make and model at checkout and we flash it before it ships.
Only on Toyota and Lexus push-start vehicles with the FTI-TLP2, FTI-TLP3 or FTI-TLP4, and only if you want to get in and drive away without the engine shutting off. When a kit has one, it’s under Add-ons.
Yes, at our Markham shop or on-site in the GTA, with our lifetime installation warranty. Book an install.
Yes. Shipping is free on orders over $200, and $10 under that.
Text us your year, make and model and we’ll confirm the right kit before you order.