We pair it for you
Bring the vehicle and the new remote to our Markham shop and we’ll pair it to your system.
Ships across Canada from Markham · Installed at our shop or on-site in the GTA

A spare or replacement Compustar remote
One remote. It pairs with the antenna already on your vehicle.
Total
This one's out of stock right now. Text us and we'll tell you when it's back
Text us your year, make and modelLost or broke a remote? A replacement has to match the antenna on your vehicle, not just the brand. Check the FCC ID on the back of your old remote against the one below.
A replacement remote has to match the antenna on your vehicle, not just the brand. The quickest check is the FCC ID on the back of your old remote: if it reads VA5REN500-1WFX, it’s this remote.
Not sure it fits? Text us a photo of the label on your control module (usually under the driver’s side of the dash) and the back of your old remote, and we’ll confirm it before you order.
ANT-2WFMX
Compustar ANT-2WFMX Antenna$70.00 CADSee it
ANT-1WFMX
Compustar ANT-1WFMX Antenna$50.00 CADSee it
If the antenna on your windshield is one of these, this remote pairs with it.
Remote stopped working? Try a fresh battery first.
A new remote is paired to your control module, which takes a few minutes and no tools. The steps for your remote are on our Compustar remote support page, or we can pair it for you at our Markham shop.
A replacement 1-way remote for compatible Compustar systems. If your original is lost, damaged or no longer working, this is the same transmitter — it pairs to the system already fitted to your vehicle, so nothing else needs to change.
The FCC ID is printed on the back of your old fob or inside the battery compartment. If it reads VA5REN500-1WFX, this is your remote. It pairs with the ANT-1WFMX and ANT-2WFMX antenna modules.
This fob needs pairing to your system before it will work. Most people manage it themselves using the guide linked on this page. If you'd rather not, bring the vehicle to our Markham shop and we'll do it.
Takes CR2025 x 2. Try a fresh set in your old fob first — a flat battery and a dead fob behave identically, and batteries cost a fraction of this.
Free shipping on orders over $200.
Buy it from us and we can set it up for you.
Bring the vehicle and the new remote to our Markham shop and we’ll pair it to your system.
Drop it off or wait at our Markham shop, or we come to you in the GTA. Most installs can be done on-site; a few need the shop.
Every install we do comes with our lifetime installation warranty.
Pairing a remote takes a few minutes and no tools: the steps for your remote are on our Compustar remote support page. Replacing a remote? Try a fresh battery in the old one first. Text us the FCC ID on your remote with any questions.
Verified reviews from our customers.
Check the label on your control module, usually under the driver’s side of the dash, against the list under Will it work with your system?. Not sure which module you have? Text us a photo of the label.
Only if it’s made for that antenna. The quickest check is the FCC ID on the back of your old remote: match it to the one on this page, where the antenna it pairs with is listed too.
A single remote is a spare or a replacement for one you have. A kit has its own antenna, so it’s the way to upgrade, say from 1-way to 2-way, or to replace a remote that isn’t made anymore. See the remote kits.
Try a fresh battery first: key fob batteries. If it still doesn’t work, text us the FCC ID on the back of the remote.
Yes, at our Markham shop. Adding a remote kit during a remote starter install? We do it at the same time, with our lifetime installation warranty. Book an install.
Yes. Shipping is free on orders over $200, and $10 under that.
Text us the FCC ID on your remote, or a photo of your control module’s label, and we’ll confirm the right part before you order.