ViofoBP60

5000 mAh LiFePO4 dash cam battery pack that runs parking mode without draining your car battery. Manual, setup help and answers in one place.

Status
Current model
Documents
1 current
BP60 user manual
V26.08.24
Sold as
BP60

Manuals and guides

For owners

  • BP60 user manual Owner's manual, PDF, V26.08.24
    View Download
Setup help

What the BP60 lights mean

The BP60 has three indicator lights beside the power button.

  • Battery light: solid green is 80 to 100%, solid yellow is 21 to 79%, solid red is 5 to 20%, and flashing red means below 5%.
  • Charging light: flashing red means the pack is charging. Solid red means it is running your dash cam from its own battery.
  • Bluetooth light: flashing blue means no phone is connected. Solid blue means the VIOFO Dashcam App is connected.

More answers for the BP60

BP60 charge times and parking runtime

VIOFO rates the BP60's charge times at about:

  • Hardwiring power cable: about 45 minutes, charging from the fuse box.
  • Cigarette lighter cable: about 65 minutes.
  • USB-C fast charging: about 85 minutes with a 60 W USB-C PD charger.

A full pack runs a dash cam drawing 3 W for about 20 hours in parking mode. Real runtime depends on your camera, its parking mode settings and the temperature. While you drive, the car charges the BP60 and powers the dash cam at the same time.

Power, reset and pairing a new phone
  • Power on or off: hold the ON/OFF button for 2 seconds.
  • Reset: hold the ON/OFF button for 8 seconds.
  • New phone: unbind the old phone in the VIOFO Dashcam App under Settings, Unbind Device. If the old phone is lost, press the power button 5 times in a row to clear the pairing, then tap Add Battery Pack in the app on the new phone.