BrandmotionRDBS-1600

Brandmotion's 77 GHz radar blind spot kit with cross-traffic alerts. Install guide, what the lights mean, wiring and troubleshooting.

Status
Current model
Documents
1 current
RDBS-1600 installation guide
Oct 2023
Sold as
RDBS-1600

Manuals and guides

For installers

Wiring, programming and install detail for technicians and experienced DIY installers.

  • RDBS-1600 installation guide Installation guide, PDF, Oct 2023
Setup help

How the RDBS-1600 warns you

The RDBS-1600 has an amber light on each front pillar and a buzzer.

  • Light on, solid: a vehicle is in the lane beside you on that side, within about two car lengths back.
  • Light flashing and the buzzer sounds: you've signalled toward it. Stay in your lane.
  • Reversing: a vehicle coming from that side, up to about 30 m away. Stop backing out.

Blind spot warnings start at about 30 km/h, or when you're stopped and a vehicle comes up beside you. It watches the lanes right next to you, not two lanes over. The buzzer has high, medium and low volume; the more hidden it's mounted, the quieter it is.

More answers for the RDBS-1600

No cross-traffic alert when reversing

Cross-traffic alert only works if the kit's green wire is connected to the vehicle's reverse signal. If the blind spot warnings work on the road but you never get a warning when backing out with traffic coming, that connection is the first thing to check.

It warns about motor vehicles, like cars, trucks and motorcycles, coming down the aisle. It won't warn about people, shopping carts or parked cars.

Troubleshooting: aim, false alarms, swapped sides
  • Nothing happens at all: check the 3 A fuse on the red power wire and that every plug is pushed all the way in.
  • It alarms with nothing there: a radar or its bracket is loose, something metal is in front of it, or it's aimed too low. Each radar should point 2 to 3 degrees up.
  • It only warns when a car is very close: the radars aren't at the right angle. Each should face about 45 degrees out from the back of the vehicle.
  • Left and right are backwards and the buzzer is silent: the left and right radar cables are swapped.
  • The buzzer sounds strange: look for water in a radar connector, or a plug that isn't fully seated.

Had us install it? Submit a support ticket and we'll check the aim. Our installation is covered for life.

Test it on the road

After installing, check both sides before you trust it.

  1. Turn the vehicle on. The warning lights flash briefly as it starts up.
  2. On a multi-lane road, with a helper if you can, let a vehicle come up beside you on the left. The left light should come on.
  3. Put your left signal on while it's there. The light should flash and you should hear the tone.
  4. Repeat on the right. Kits with cross-traffic alert: back out of a parking spot with a car coming down the aisle, safely, with a helper watching.

If the wrong side lights up, the left and right wires are swapped. Radar kits that start warning at a set speed won't react in a parking lot until you're going fast enough.

Warnings when nothing is there, or no warning

A blind spot kit is a second pair of eyes, not a replacement for a shoulder check. Some false warnings are normal: guard rails, concrete barriers, construction barrels, a trailer you're towing, or a vehicle in the lane two over can all set it off for a moment.

  • Warning all the time with nothing there: the sensor or its bracket has moved, or something metal (a hitch, a licence plate frame, a bumper guard) is in front of it.
  • No warnings at all: check the fuse and that the lights flash when you start the vehicle. Ultrasonic sensors also go quiet when they're caked in snow or slush.
  • After a bumper repair: body filler and new paint can change how a radar sees. Have the aim checked.

If we installed it and it's still not right, submit a support ticket: our installation is covered for life.

Setup video

From the Lockdown Security YouTube channel