ViofoBTR200

Bluetooth remote for VIOFO dash cams. Lock a video, mute the mic or switch Wi-Fi with one press. Manual, pairing help and answers in one place.

Status
Current model
Documents
1 current
Sold as
BTR200

Manuals and guides

For owners

Setup help

Pairing the BTR200 with your dash cam

  1. Turn on the dash cam: let it finish starting up.
  2. Hold the video lock button: press and hold the triangle on the remote for 3 seconds.
  3. Watch the light: it turns from red to blue once the remote is paired.

If the light flashes red instead, pairing didn't work. Restart both the dash cam and the remote, then try again. VIOFO says all of its current dash cams work with the BTR200 except the A119 V3.

More answers for the BTR200

What the three buttons do
  • Video lock (triangle): press once to lock the file being recorded so it can't be overwritten.
  • Mic button: press once to turn audio recording on or off.
  • Action button: press once to turn the dash cam's Wi-Fi on or off.

The Mic and Action buttons can be reassigned in the dash cam's settings or the VIOFO App. The other options are taking a photo, powering off the camera, switching to time-lapse recording, and turning HDR on or off.

Changing the BTR200 battery

The BTR200 runs on a single CR2032 coin cell.

  1. Open: slide the battery cover to the right.
  2. Replace: fit the new CR2032 with the + side facing up.
  3. Close: slide the cover back to the left to lock it.

The remote works from 3 to 5 metres away from the dash cam.