Mid City EngineeringSKSNG907G

Remote starter and alarm for the 2025-2026 Mercedes-Benz Sprinter. Mid City's user's manual, valet mode, menu options, error codes and install manual.

Status
Current model
Documents
19 current
Sold as
SKSNG907G

Manuals and guides

For owners

  • SKSNG907 and SKSNG907G user's manual Owner's manual, online
    View online
  • Valet mode (remote start off) with the steering wheel buttons Programming guide, online
    View online
  • Valet mode with the turn signal stalk (no volume and mute buttons) Programming guide, online
    View online
  • Turn valet mode off (remote start on) without volume and mute buttons Programming guide, online
    View online
  • SKSNG907 and SKSNG907G menu options Option settings reference, online
    View online
  • SKSNG907 and SKSNG907G error codes Troubleshooting, online
    View online
  • SmartKey Starter FAQ Other, online
    View online
  • Mid City Engineering warranty Other, online
    View online

For installers

Wiring, programming and install detail for technicians and experienced DIY installers.

  • SKSNG907 and SKSNG907G installation manual Installation guide, online
    View online
  • Turn on the RADIO menu on Sprinters without it Programming guide, online
    View online
  • Add a Compustar or Directed alarm to the SKSNG907 and SKSNG907G Installation guide, online
    View online
  • Bypass the SKSNG907 or SKSNG907G with jumpers Troubleshooting, online
    View online
  • Bypass or remove the SKSNG907 or SKSNG907G Installation guide, online
    View online
  • Program with a USB programmer (NG-PROG, ADS-USB, XKLOADER) Programming guide, online
    View online
  • Add Compustar RF remotes Programming guide, online
    View online
  • Add a Compustar DroneMobile module Installation guide, online
    View online
  • Connect Directed SmartStart Installation guide, online
    View online
  • Add a Compustar CM alarm module Installation guide, online
    View online
  • General installation troubleshooting Troubleshooting, online
    View online
Setup help

Remote start your Sprinter

Press Lock, Unlock, Lock on your factory key fob. The default run time is 1 hour: it can be changed in the menu or with a USB programmer.

Using auto start from a battery monitor or a start/stop relay? The van restarts whenever a new start signal arrives, even after the run time is up.

Want more range, or start from your phone? Mid City works with Compustar DroneMobile, Directed SmartStart, and Compustar or Directed remotes.

More answers for the SKSNG907G

Turn remote start off for service (valet mode)

Put the system in valet mode before the vehicle goes in for service, or when it's parked indoors or anywhere it shouldn't start.

  • 1. Ignition to ACCTurn the ignition to the first position. On push-button cars, press the start button once without your foot on the brake.
  • 2. Open the RADIO screenPress the Home button on the steering wheel and use the touch pad to pick RADIO on the instrument cluster.
  • 3. Open the menuPress and hold mute (press in on the volume wheel) until Rem Starter On/Off shows, then let go.
  • 4. Change and savePress and release mute to switch between On and Off. Leave the controls alone for about 7 seconds until Settings Saved shows, then turn the ignition off.

No volume and mute buttons on the steering wheel? Mid City's guides above show the turn signal stalk method.

If the module loses power (unplugged, or the battery is disconnected or goes flat), the settings go back to the factory defaults and have to be set again.

Warranty: 4 years from Mid City

Mid City Engineering covers the module against defects in material and workmanship for 4 years from the date of purchase, for the original purchaser. Claims go through the store you bought it from, with your bill of sale, and Mid City repairs or replaces the module.

Bought from us? Submit a support ticket with your order number. The warranty is void if the module's date code or serial number is missing or altered, or the module has been tampered with.