Viofo BP100 Dashcam Battery, 7650mAh, Bluetooth with Smartphone App and up to 32 Hours of Parking Mode

2025-12-02T14:49:55-05:00

Vendor: Viofo
Type: Dashcam Battery Pack
Price: 420.99

This is the Viofo BP100 7650mAh Dashcam Battery pack.

A battery pack designed to power your dash cam in parking mode for long-lasting surveillance without draining the vehicle's battery.

For more capacity and longer parking mode time (about 64 hours or 2.5 days), the Viofo EP100 extension battery pack can be added to this the BP100.

Specifications

Input Voltage / Current:
1. Cigarette lighter cable 11.8V~28V 6A Max
2. Hardwiring cable 11.8V~28V 11A Max

Output Voltage / Current:
1. Dash cam port 11.8V ~ 14.2V 3A
2. Type-C port 5V 3A

Charging Time (Approx.):
1. Cigarette lighter cable: Around 100 minutes
2. Hardwiring cable: Within 70 minutes

Usage Time (Approx.):
Approx. 32 hours (based on 3W consumption)

Battery: LiFePo4 (Lithium iron phosphate)

Battery Capacity: 12.8 V 7650 mAh

Dimensions and Weight: 171 mm (L) x 171 mm (W) x 35 mm (H) / 1.22 kg

Operating Temperature: -20°C ~ 70°C (-4°F ~ 158°F)

(Cell skin temperature cannot exceed 80°C)

Storage Temperature: -30°C ~ 90°C (-22°~194°F)

Product Features

Connect the VIOFO hardwire cable to enable parking mode for the dashcam

The hardwire output cable can be used as a replacement for the original
hardwire cable.

Supports two installation methods:
- Cigarette lighter installation: Plug the cigarette lighter plug power cable into your
vehicle’s cigarette lighter;
- Fuse box installation: Connect the hardwiring power cable into the vehicle’s fuse box.

After around 100 minutes of charging via the vehicle's cigarette lighter or
within 70 minutes via the fuse box, the battery pack can power the
dashcam for up to 32 hours (based on 3W dashcam usage draw)

Compatible with both passenger car (12V), and heavy duty commercial (24V)
electrical systems

While driving, the vehicle charges the BP100, and powers the dashcam
simultaneously, (Pass-Through Charging).

When the vehicle is turned off, the BP100 continues to power the dashcam for up to 32 hours.

With built-in Bluetooth, users can check the battery status in real-time through the
smartphone app.

The built-in Battery Management System (BMS) controls current, voltage, balance, and prevents overcharge, over-discharge, overcurrent of the BP100.

The battery capacity can be increased by connecting expansion batteries.
It is recommended to connect no more than two expansion batteries.

The app will pop up a warning alert if BP100 internal temperature reaches 50°C (122°F), and will automatically shut down if BP100 internal temperature exceeds 70°C (158°F) to prevent overheating.

Battery cycle life: Rated for 1,500 charge/discharge cycles before the battery capacity drops to 80% of the original capacity.

The Type-C output port of the battery allows users to simultaneously charge a mobile phone while powering the dash cam.